Hard HatsView all products
V-Gard® H1 Safety Helmet
The V-Gard® H1 Safety Helmet provides exceptional comfort and ease of use in a stylish low-profile hard hat design. A complete above-the-neck platform for all applications.
V-Gard® 950 Non-Vented Protective Cap
Balanced and lightweight electrician's safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension, GS-ET-29 class 1 (4kA) face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist.
V-Gard® 950 Class 2 Non-Vented Protective Cap
The V-Gard 950 Class 2 safety helmet has been developed for electrical activities requiring demanding arc flash protection up to 7kA. This balanced and lightweight unvented electrician's helmet features an integrated GS-ET-29 Class 2 (7kA) faceshield with a light transmittance ≥ 75% and a MSA-unique extended neck & ear flaps protection.
V-Gard® 930 Vented Protective Cap
Balanced, modern, low-profile head and integrated eye protection – in one vented industrial hard hat with 6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particles hazards to the eyes exist. With clear or tinted over spectacles.
Hard Hat AccessoriesView all products
Fas-Trac® III Suspension
Ensuring your workforce wears their safety helmets can be a real headache. MSA, the leading provider of protective helmets, has the perfect remedy: the Fas-Trac® III Suspension. No more pressure headaches. No more pulled hair. No more falling off. No more sacrificing worker comfort for safety. Market-leading MSA helmets now have a comfort-leading suspension!
The Push-Key safety helmets suspension with its innovative adjustment concept brings an extraordinary way to enhance your workforce retention and comfort. Push-Key, the new harness designed exclusively for MSA V-Gard® Industrial Helmets, with the best cost-benefit ratio offered in the market. You can adjust it with one hand even when worn. There is no denying how much a simple "Push" changes everything!
V-Gard® Cooling Pads
MSA offers two innovative cooling pads: Crown cooler & Crown cooler with neck shade (UPF 50+) . HyperKewl™ evaporative cooling provides extended relief from heat fatigue and heat stress. A water management system created from the HyperKewl™ fabric absorbs and releases water within the multi-layered material.
Protect eyes and face from sweat and drips with these absorbent and comfortable sweatbands. Easily snaps into all MSA industrial helmets. Makes helmets fit better, too. Machine washable.
AviationView all products
LH050 Helmet for Helicopter and General Aviation Pilots
LH 050 is MSA world recognized generation of flight helmet designed for Rescue, Combat or Transport flights on helicopters. LH 050 helmet is a single inner visor helmet particularly suited for aerobatics.
LH250 Helmet for Helicopter and General Aviation Pilots
LH 250 is MSA world recognized generation of flight helmet designed for pilots and crew members performing: Rescue, Combat or Transport flights on helicopters. LH 250 helmet includes dual visors.
Combat, Tactical & Riot ControlView all products
TC 800 PE Series
Gallet TC 800 PE Series are ballistic helmets made of UHMWPE adapted to different applications (Combat, Airbone missions, Anti-terrorism, Special Operations).
MO 5001 Series
MO 5001 helmets series protect law enforcement from shocks, projectiles, gas and smoke. The helmet is compatible with a MSA 3S-H respiratory mask for increased protection. * Polycarbonate shell and padded inner cradle provide high degree of protection for law enforcement * Chinstrap with leather neckpads and hard chincup is equipped with a anti-strangulation buckle (depending on versions). * Visor is available in 4 mm or 6 mm thick.
MO 5006 Series
MO 5006 Helmet provides both comfort and protection when danger is high. The jet-shaped helmet is intended for riot control and law enforcement duties where there are risks of projectiles, gas, smoke and more. The area between the helmet shell and visor is waterproof, while the visor, helmet and neckcurtain are resistant to penetration, chemical aggression and flames. To ensure communication is possible, the helmet is fully compatible with breathing masks and communication systems. The inner parts of helmet can be easily dismantled and washed, while the 3-point-chinstrap contains a locking buckle and an anti-strangulation system.
TC 500 Series
Gallet TC 500 Helmets Series are ballistic helmets adapted to different applications: * Combat, where gear need to be robust and reliable, and where strategies co-exist with modern technologies and means. * Airborne missions, which are complex and require different equipment (free fall jumps, 0₂ equipment, specific wings…). * Anti-terrorism & Special Operations, where teams often operate under high ballistic threats. Each team member designs his own and unique configuration of equipment. * Intelligence Operations, where the different phases of the missions (infiltration, intelligence gathering and exfiltration) require lightweight and discrete equipment. The helmets are available in 3 ear cuts and in green, black, or tan with a non-reflective finish.