V-Gard® Visors for Welding, Cutting and Brazing Applications

V-Gard polycarbonate shaded visors are thick and molded to protect against damage from impact, elevated temperatures, weld spatter and infrared (IR) radiation. Ideal for autogenous welding, metal pouring, gas soldering and light cutting/brazing, they’re engineered for heavy-duty use.

Part Number
Description
10115859
10115859

Molded V-Gard visor, PC, Shade 3 IR, 203x432x1,8 mm (EN 166 3.0/4-3 1BT 39)

Length: 141.000 CM (55.512 IN)
Width: 204.000 CM (80.315 IN)
Height: 262.000 CM (103.150 IN)
Weight: 0.176 KG (0.388 LB)
Size: ONE SIZE FITS ALL
Color: GREEN

10115860
10115860

Molded V-Gard visor, PC, Shade 3 IR, chinguard slots, 203x432x1,8 mm - EN 166 (3.0/4-3 1BT 39)

Length: 149.000 CM (58.661 IN)
Width: 256.000 CM (100.787 IN)
Height: 208.000 CM (81.890 IN)
Weight: 0.176 KG (0.388 LB)
Size: ONE SIZE FITS ALL
Color: GREEN

10115861
10115861

Molded V-Gard visor, PC, Shade 5 IR, 203x432x1,8 mm - EN 166 (5.0/4-5 1BT 39)

Length: 134.000 CM (52.756 IN)
Width: 294.000 CM (115.748 IN)
Height: 201.000 CM (79.134 IN)
Weight: 0.191 KG (0.421 LB)
Size: ONE SIZE FITS ALL
Color: GREEN

10115862
10115862

Molded V-Gard visor, PC, Shade 5 IR, chinguard slots 203x432x1,8 mm - EN 166 (5.0/4-5 1BT 39)

Length: 134.000 CM (52.756 IN)
Width: 294.000 CM (115.748 IN)
Height: 201.000 CM (79.134 IN)
Weight: 0.191 KG (0.421 LB)
Size: ONE SIZE FITS ALL
Color: GREEN

  • Suitable for applications where welding, cutting and brazing hazards exist.
  • Special visors, called nitrometers, work with V-Gard Retractable or Standard Chin Protectors
Markets: Construction, Construction, General Industry, Oil & Gas, Utilities
Applications: Welding

Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.

USA Approvals


Canadian Approvals


European Union

EN166 marking explanation=
"3" Light transmittance 8.5%-17.8% (Welding - % UV % IR)
"5" Light transmittance 1.2%-3.2% (Welding - % UV % IR)
"4-3"  Light transmittance 8.5-17.8% (IR EN171)
"4-5" 1.2-3.2% (IR EN171)

"1" highest optical quality for permanent use
“B” High speed particles with medium energy impact (120 m/s)
“T” Additional resistance at extreme temperatures (–5 and +55 °C) 
“3” Liquid droplets and splash
“9” Non-adherence of molten metal and resistance to penetration of hot solids

 

Australia/New Zealand

  • AS/NZS 1337.1:2010