View Part Numbers

The standard slotted frame works ideally with any MSA slotted  helmet. The universal frame featuring a heavy-duty, flat, rubber strap can be used with slotted and non-slotted MSA helmets.  With the unique sloped frame design material slides off the frame and out of site. The optional debris control creates a tight seal between helmet and frame. The elevated temperature versions withstand temps up to 350ºF (176ºC).

Part Number
Description

V-Gard Frame Standard HDPE for slotted helmets with debris control

Length: 166.000 MM (6.535 IN)
Width: 253.000 MM (9.961 IN)
Height: 77.000 MM (3.031 IN)
Weight: 0.112 KG (0.247 LB)
Size: ONE SIZE FITS ALL
Color: BLACK

V-Gard Frame Universal HDPE with debris control

Length: 251.000 MM (9.882 IN)
Width: 169.000 MM (6.654 IN)
Height: 65.000 MM (2.559 IN)
Weight: 0.130 KG (0.287 LB)
Size: ONE SIZE FITS ALL
Color: BLACK

V-Gard Frame Standard HDPE for slotted helmets

Length: 163.000 MM (6.417 IN)
Width: 255.000 MM (10.039 IN)
Height: 82.000 MM (3.228 IN)
Weight: 0.082 KG (0.181 LB)
Size: ONE SIZE FITS ALL
Color: BLACK

V-Gard Frame Standard Elev. Temp Nylon for slotted helmets

Length: 162.000 MM (6.378 IN)
Width: 245.000 MM (9.646 IN)
Height: 79.000 MM (3.110 IN)
Weight: 0.094 KG (0.207 LB)
Size: ONE SIZE FITS ALL
Color: GRAY

V-Gard Frame Universal HDPE

Length: 163.000 MM (6.417 IN)
Width: 249.000 MM (9.803 IN)
Height: 65.000 MM (2.559 IN)
Weight: 0.102 KG (0.225 LB)
Size: ONE SIZE FITS ALL
Color: BLACK
  • Unique 3-point visor loading to fit and remove visors quickly
  • Sloped design allows material to easily slide off the frame
  • Works with or without ear muffs
  • Perfect Compatibility with many half-mask respirators and more
  • Various visor versions to suit all applications
  • Non-metal construction for use in electrical applications
  • Replaceable, optional debris control creates tight seal between frame and helmet
  • Universal= Heavy-duty, flat, rubber strap for easy and secure placement on MSA slotted and non-slotted  helmets
  • ET frames are tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing.
Markets: Construction, General Industry, Mining, Oil & Gas, Utilities
Applications: Confined Space, Welding

Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.

  • ANSI/ISEA Z87.1-2010
  • CSA Z94
  • EN 166
  • AS/NZS 1337.1:2010

 

EN166 389 BT / EN1731-F =

EN166 marking explanation
“B” High speed particles with medium energy impact (120 m/s)
“T” Additional resistance at extreme temperatures (–5 and +55 °C)
“3” Liquid droplets and splash
“8” Electric arc resistance 
“9” Non-adherence of molten metal and resistance to penetration of hot solids